Osborne’s High Frequency Transformers
Osborne’s high frequency transformers are used to step-up, step-down and isolate voltages in advanced power systems. Isolation may be used to help provide a degree of secondary-side immunity from voltage spikes and noise (both common-mode and transverse-mode) present on the primary-side system. The isolation can allow separate grounds on both the input and output sides of the transformer. Osborne also designs with a range of electrostatic shielding to provide several levels of noise immunity.
Let’s talk about your project.
High Frequency Transformers Design Options Table
|Input Voltages:||0 – 15,000 Volts|
|Output Voltages:||0 – 600 Volts|
|Thermal Voltampere Ratings:||0.250 – 5,000 Voltamperes|
|Compensated Voltamp Rating:||0.250 – 5,000 Voltamperes|
|Burden Power Factor:||0 – 100% Lagging or Leading|
|Frequency:||20 – 100,000 Hertz|
|Phase:||Single – Multiple|
|Electrostatic Shielding:||Single – Multiple Shields|
|Terminals:||Wire Leads – Finger Safe|
|Enclosures:||Open Core & Coil – Hazardous Environment|
|Agency Approvals:||UL, CSA, CE and/or TUV|
Why Osborne Transformer?
Every Osborne transformer is designed for extreme durability. Your design begins with extensive electromagnetic and mechanical modeling, then proceeds through a detailed battery of simulations. These simulations are progressively optimized to arrive at the ideal core, conductor, and other critical components. Your application will engage the expertise of a select network of the world’s finest raw material suppliers. The composite parts of your transformer will be built in strict compliance with Osborne’s exacting standards, and rigorous testing procedures.
More About Osborne